bzd27c3v6p to bzd27c200p www.vishay.com vishay semiconductors rev. 2.1, 29-nov-11 1 document number: 85810 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 zener diodes with surge current specification features ? sillicon planar zener diodes ? low profile surface-mount package ? zener and surge current specification ? low leakage current ? excellent stability ? high temperature soldering: 260 c/10 s at terminals ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec notes (1) mounted on epoxy-glass pcb with 3 mm x 3 mm cu pads ( ? 40 m thick) (2) t j = 25 c prior to surge primary characteristics parameter value unit v z range nom. 3.6 to 200 v test current i zt 5 to 100 ma v z specification pulse current int. construction single ordering information device name ordering code taped units per reel minimum order quantity bzd27c3v6p to bzd27c200p bzd27c3v6p to bzd27c200p-series-gs08 3000 per 7" reel (8 mm tape) 15 000/box bzd27c3v6p to bzd27c200p bzd27c3v6p to bzd27c200p-series-gs18 10 000 per 13" reel (8 mm tape) 10 000/box package package name weight molding compound flammability rating moisture sensitivity level soldering conditions do-219ab (smf) 15 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipation t l = 80 c p tot 2300 mw t a = 25 c (1) p tot 800 mw non repetitive peak surge power dissipation (2) 100 s square pulse p zsm 300 w 10/1000 s waveform (bzd27-c7v5p to bzd27-c100p) p rsm 150 w 10/1000 s waveform (bzd27-c100p to bzd27-c200p) p rsm 100 w junction to lead r thjl 30 k/w junction to ambient air mounted on epoxy-glass pcb with 3 mm x 3 mm cu pads ( ? 40 m thick) r thja 180 k/w junction temperature t j 150 c storage temperature range t stg - 55 to + 150 c
bzd27c3v6p to bzd27c200p www.vishay.com vishay semiconductors rev. 2.1, 29-nov-11 2 document number: 85810 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ?maximum v f = 1.2 v, at i f = 0.2 a ? electrical characteristics when used as voltage regulator diodes (1) pulse test: t p ? 5 ms electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range (1) test current reverse current dynamic resistance temperature coefficient v z at i zt1 i zt1 i r at v r z z at i zt1 ? vz at i zt1 v ma a v ? %/c min. nom. max. max. typ. max. min. max. bzd27c3v6p d0 3.4 3.6 3.8 100 100 1 4 8 - 0.14 - 0.04 bzd27c3v9p d1 3.7 3.9 4.1 100 50 1 4 8 - 0.14 - 0.04 bzd27c4v3p d2 4 4.3 4.6 100 25 1 4 7 - 0.12 - 0.02 bzd27c4v7p d3 4.4 4.7 5 100 10 1 3 7 - 0.1 0 bzd27c5v1p d4 4.8 5.1 5.4 100 5 1 3 6 - 0.08 0.02 bzd27c5v6p d5 5.2 5.6 6 100 10 2 2 4 - 0.04 0.04 bzd27c6v2p d6 5.8 6.2 6.6 100 5 2 2 3 - 0.01 0.06 bzd27c6v8p d7 6.4 6.8 7.2 100 10 3 1 3 0 0.07 bzd27c7v5p d8 7 7.5 7.9 100 50 3 1 2 0 0.07 bzd27c8v2p d9 7.7 8.2 8.7 100 10 3 1 2 0.03 0.08 bzd27c9v1p e0 8.5 9.1 9.6 50 10 5 2 4 0.03 0.08 bzd27c10p e1 9.4 10 10.6 50 7 7.5 2 4 0.05 0.09 bzd27c11p e2 10.4 11 11.6 50 4 8.2 4 7 0.05 0.1 bzd27c12p e3 11.4 12 12.7 50 3 9.1 4 7 0.05 0.1 bzd27c13p e4 12.4 13 14.1 50 2 10 5 10 0.05 0.1 bzd27c15p e5 13.8 15 15.6 50 1 11 5 10 0.05 0.1 bzd27c16p e6 15.3 16 17.1 25 1 12 6 15 0.06 0.11 bzd27c18p e7 16.8 18 19.1 25 1 13 6 15 0.06 0.11 bzd27c20p e8 18.8 20 21.2 25 1 15 6 15 0.06 0.11 bzd27c22p e9 20.8 22 23.3 25 1 16 6 15 0.06 0.11 bzd27c24p f0 22.8 24 25.6 25 1 18 7 15 0.06 0.11 bzd27c27p f1 25.1 27 28.9 25 1 20 7 15 0.06 0.11 bzd27c30p f2 28 30 32 25 1 22 8 15 0.06 0.11 bzd27c33p f3 31 33 35 25 1 24 8 15 0.06 0.11 bzd27c36p f4 34 36 38 10 1 27 21 40 0.06 0.11 bzd27c39p f5 37 39 41 10 1 30 21 40 0.06 0.11 bzd27c43p f6 40 43 46 10 1 33 24 45 0.07 0.12 bzd27c47p f7 44 47 50 10 1 36 24 45 0.07 0.12 bzd27c51p f8 48 51 54 10 1 39 25 60 0.07 0.12 bzd27c56p f9 52 56 60 10 1 43 25 60 0.07 0.12 bzd27c62p g0 58 62 66 10 1 47 25 80 0.08 0.13 bzd27c68p g1 64 68 72 10 1 51 25 80 0.08 0.13 bzd27c75p g2 70 75 79 10 1 56 30 100 0.08 0.13 bzd27c82p g3 77 82 87 10 1 62 30 100 0.08 0.13 bzd27c91p g4 85 91 96 5 1 68 60 200 0.08 0.13 BZD27C100P g5 94 100 106 5 1 75 60 200 0.09 0.13 bzd27c110p g6 104 110 116 5 1 82 80 250 0.09 0.13 bzd27c120p g7 114 120 127 5 1 91 80 250 0.09 0.13 bzd27c130p g8 124 130 141 5 1 100 110 300 0.09 0.13 bzd27c150p g9 138 150 156 5 1 110 130 300 0.09 0.13 bzd27c160p h0 153 160 171 5 1 120 150 350 0.09 0.13 bzd27c180p h1 168 180 191 5 1 130 180 400 0.09 0.13 bzd27c200p h2 188 200 212 5 1 150 200 500 0.09 0.13
bzd27c3v6p to bzd27c200p www.vishay.com vishay semiconductors rev. 2.1, 29-nov-11 3 document number: 85810 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ?maximum v f = 1.2 v, at i f = 0.2 a ? electrical characteristics when used as protection diodes (1) non-repetitive peak re verse current in accordance with iec 60-1, section 8 (10/1000 s pulse); see fig. 5 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range test current reverse current clamping voltage temperature coefficient v z at i zt1 i zt1 i r at v r v c at i rsm (1) ? vz at i zt1 v ma a v v a %/c min. nom. max. max. max. min. max. bzd27c7v5p d8 7 7.5 7.9 100 1500 6.2 11.3 13.3 0 0.07 bzd27c8v2p d9 7.7 8.2 8.7 100 1200 6.8 12.3 12.2 0.03 0.08 bzd27c9v1p e0 8.5 9.1 9.6 50 100 7.5 13.3 11.3 0.03 0.08 bzd27c10p e1 9.4 10 10.6 50 20 8.2 14.8 10.1 0.05 0.09 bzd27c11p e2 10.4 11 11.6 50 5 9.1 15.7 9.6 0.05 0.1 bzd27c12p e3 11.4 12 12.7 50 5 10 17 8.8 0.05 0.1 bzd27c13p e4 12.4 13 14.1 50 5 11 18.9 7.9 0.05 0.1 bzd27c15p e5 13.8 15 15.6 50 5 12 20.9 7.2 0.05 0.1 bzd27c16p e6 15.3 16 17.1 25 5 13 22.9 6.6 0.06 0.11 bzd27c18p e7 16.8 18 19.1 25 5 15 25.6 5.9 0.06 0.11 bzd27c20p e8 18.8 20 21.2 25 5 16 28.4 5.3 0.06 0.11 bzd27c22p e9 20.8 22 23.3 25 5 18 31 4.8 0.06 0.11 bzd27c24p f0 22.8 24 25.6 25 5 20 33.8 4.4 0.06 0.11 bzd27c27p f1 25.1 27 28.9 25 5 22 38.1 3.9 0.06 0.11 bzd27c30p f2 28 30 32 25 5 24 42.2 3.6 0.06 0.11 bzd27c33p f3 31 33 35 25 5 27 46.2 3.2 0.06 0.11 bzd27c36p f4 34 36 38 10 5 30 50.1 3 0.06 0.11 bzd27c39p f5 37 39 41 10 5 33 54.1 2.8 0.06 0.11 bzd27c43p f6 40 43 46 10 5 36 60.7 2.5 0.07 0.12 bzd27c47p f7 44 47 50 10 5 39 65.5 2.3 0.07 0.12 bzd27c51p f8 48 51 54 10 5 43 70.8 2.1 0.07 0.12 bzd27c56p f9 52 56 60 10 5 47 78.6 1.9 0.07 0.12 bzd27c62p g0 58 62 66 10 5 51 86.5 1.7 0.08 0.13 bzd27c68p g1 64 68 72 10 5 56 94.4 1.6 0.08 0.13 bzd27c75p g2 70 75 79 10 5 62 103.5 1.5 0.08 0.13 bzd27c82p g3 77 82 87 10 5 68 114 1.3 0.08 0.13 bzd27c91p g4 85 91 96 5 5 75 126 1.2 0.09 0.13 BZD27C100P g5 94 100 106 5 5 82 139 1.1 0.09 0.13 bzd27c110p g6 104 110 116 5 5 91 139 0.72 0.09 0.13 bzd27c120p g7 114 120 127 5 5 100 152 0.65 0.09 0.13 bzd27c130p g8 124 130 141 5 5 110 169 0.59 0.09 0.13 bzd27c150p g9 138 150 156 5 5 120 187 0.53 0.09 0.13 bzd27c160p h0 153 160 171 5 5 130 205 0.48 0.09 0.13 bzd27c180p h1 168 180 191 5 5 150 229 0.43 0.09 0.13 bzd27c200p h2 188 200 212 5 5 160 254 0.39 0.09 0.13
bzd27c3v6p to bzd27c200p www.vishay.com vishay semiconductors rev. 2.1, 29-nov-11 4 document number: 85810 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. forward voltage fig. 2 - typ. diode capacitance vs. reverse voltage fig. 3 - power dissipation vs. ambient temperature fig. 4 - maximum pulse power dissipation vs. zener voltage fig. 5 - non-repetitive peak revers e current pulse definition 0.1 1 10 0.6 0.8 1.0 1.2 1.4 1.6 17411 i f - for w ard c u rrent (a) v f - for w ard v oltage ( v ) max. v f ty p. v f 10 100 1000 10 000 0 0.5 1.0 1.5 2.0 2.5 3.0 17412 c d - typ. j u nction capacitance (pf) v r - re v erse v oltage ( v ) c5 v 1p c6 v 8p c12p c27p c51p c200p c18p 0 1.0 0.5 1.5 2.5 2.0 3.0 0 25 50 75 100 125 150 17413 p tot - po w er dissipation (w) t am b - am b ient temperat u re (c) am b ient temperat u re tie point temperat u re 0 40 20 120 140 60 100 80 160 0 50 100 150 200 17414 p rsm - max. p u lse po w er dissipation (w) v znom - zener v oltage ( v ) 17415 t i rsm (%) 100 90 50 10 t 1 t 1 = 10 s t 2 = 1000 s t 2
bzd27c3v6p to bzd27c200p www.vishay.com vishay semiconductors rev. 2.1, 29-nov-11 5 document number: 85810 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): do219-ab (smf) foot print re commendation: re v . 3 - date: 13. march 2007 doc u ment no.:s8- v -3915.01-001 (4) 1.3 (0.051) 1.3 (0.051) 2.9 (0.114) 1.4 (0.055) 2.9 (0.114) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) 0.85 (0.033) 0.35 (0.014) 1.2 (0.047) 0.8 (0.031) 1.9 (0.075) 1.7 (0.067) 1.08 (0.043) 0.88 (0.035) 0.25 (0.010) 0.05 (0.002) 0.1 (0.004) 0 (0.000) 5 5 created - date: 15. fe b r u ary 2005 17247 detail z enlarged
bzd27c3v6p to bzd27c200p www.vishay.com vishay semiconductors rev. 2.1, 29-nov-11 6 document number: 85810 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 blistertape dimensions for smf in millimeters 18513 ps doc u ment- n o.: s8- v -3717.02-001 (3)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
